Page 1 of 1
Who has folded Lang's Black Forest Cuckoo Clock ?
Posted: February 7th, 2010, 8:47 am
by moonowl
Did you use the floor to fold the huge paper? How long was the paper you used? How Large was the finished model? Who has the largest clock??
Posted: February 7th, 2010, 10:25 am
by Argil
I did
[img]http://www.pliagedepapier.com/gallery/albums/userpics/12010/normal_DSCN0068_%28Small%29.JPG[/img]
With craft paper, 160 cm / 16 cm. The model is 28 cm high, 12 cm large (taking the leaf but 7 cm without the leaf).
I used the floor only to measure and cut the necessary strip of paper, after I fold it on a table (part of the paper was out of the table).
Posted: February 7th, 2010, 12:02 pm
by origami_8
I folded it three times, all three times on a table.
The first one from 20x200cm paper:
The second one from 10x100cm paper:
The third one from 4.8x48cm paper:
Here's an article about the first one that I folded together with my friend:
http://www.origamiaustria.at/articles_c ... php?lang=2
If you should consider folding the clock I recommend you take 16x160cm as starting size, this should be about the ideal size.
Posted: February 7th, 2010, 1:12 pm
by PauliusOrigami
I did.
with a 13x130 cm thick kraft paper:
Posted: February 7th, 2010, 3:35 pm
by TheRealChris
Posted: February 8th, 2010, 1:10 am
by marckrsh
I made his first clock from 21 foot paper. For the BFC I used much smaller. I was the test dummy for that one, so any mistakes are probably my fault. The biggest (original) problem with the diagrams was some miss-numbering. While it created some confusion for me, I really felt bad for Robert who had to type in the numbers again for about half the instructions.
](./images/smilies/eusa_wall.gif "Brick wall"){kind=small}