Page 1 of 1
Alec Fehl - A Flying V Guitar
Posted: February 20th, 2009, 1:14 am
by singular9
hello guys, I need help on this guitar
go to this site to get directions on how to do it
http://dev.origami.com/images_pdf/flyingv.pdf
thank you

Posted: February 20th, 2009, 1:57 am
by ftangdude55
Which steps, Singular9?
Be more specific next time...
(It seems like every new member of the forum does that. It's okay though; learn from your mistakes.

)
Posted: February 20th, 2009, 2:44 am
by singular9
step 5
Posted: February 20th, 2009, 3:21 am
by Brimstone
Posted: February 20th, 2009, 1:09 pm
by singular9
what about a picture or video on how to fold the triangle thing on the bottom and at the same time to fold side flaps
Posted: February 21st, 2009, 4:24 am
by Brimstone
Posted: February 21st, 2009, 2:25 pm
by singular9
i dont get the 3-4 picture
plees show under side
Posted: February 22nd, 2009, 12:30 am
by Brimstone
Are you sure you precreased as the diagrams tell you to? Because with the indications and the pictures it should be clear already how to do it. Anyway, here's a picture of the bottom side:
If you still don't get it, do not give up keep trying or ask again.
Posted: February 22nd, 2009, 2:13 am
by singular9
can you do this exact step in super duper slow motion millimeter by millimeter
Posted: February 22nd, 2009, 3:33 am
by malachi
If you still aren't getting it, I will have to agree that you probably need to work on simpler models first and work your way up to something of this complexity. There is nothing wrong with having to practice, you'll learn a lot about how the paper moves and behaves and you'll have better results in the long run.
Posted: February 22nd, 2009, 11:37 am
by FlareglooM
Since I saw the other topic of you, asking what a valley and mountain fold is, I assume you know the defenition of them.
In the diagram:
The mountain fold is shown by a dash-dot line
and
The valley fold is shown by a dashed line.
Fold those ones right,

I colored the Mountain folds red for you and the valley folds blue.
Now try it with the photodiagrams of Brimstone.
If you cannot figure it out, begin simpler. You need basic knowledge, else you will get trouble in difficult models.
Posted: February 22nd, 2009, 8:26 pm
by Brimstone
Here's my last attempt:
<embed src="
http://www.youtube.com/v/O7-d3WMxhnY&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed>
Posted: February 22nd, 2009, 9:58 pm
by singular9
thanks for the video vary helpfull