folding gold?

General discussion about Origami, Papers, Diagramming, ...
User avatar
OrigamiGeek
Forum Sensei
Posts: 966
Joined: February 17th, 2012, 2:29 pm
Location: calgary

folding gold?

Post by OrigamiGeek »

has anyone folded with gold?
here is the why I am bring this up
when eating breakfast with my dad he asked me if any one folded with gold so I asking on hear.
Check out my gallery and don't forget to leave a comment!
User avatar
spiritofcat
Senior Member
Posts: 473
Joined: January 3rd, 2007, 12:54 am
Location: Sydney, Australia

Re: folding gold?

Post by spiritofcat »

Gold coloured paper, or actual gold?
User avatar
OrigamiGeek
Forum Sensei
Posts: 966
Joined: February 17th, 2012, 2:29 pm
Location: calgary

Re: folding gold?

Post by OrigamiGeek »

actual gold it is just an idea!
Check out my gallery and don't forget to leave a comment!
User avatar
TheUnChosenOne
Super Member
Posts: 172
Joined: June 22nd, 2011, 4:45 am
Location: San Jose, CA, USA

Re: folding gold?

Post by TheUnChosenOne »

maybe some dirty rich origamist who has no sense of value, yeah. I mean, it wouldn't be that hard to fold it.
"No problem is so big or complicated that it can't be run away from."
--Charles Schulz
User avatar
OrigamiGeek
Forum Sensei
Posts: 966
Joined: February 17th, 2012, 2:29 pm
Location: calgary

Re: folding gold?

Post by OrigamiGeek »

LOL it would be harder to get it then fold it !
Check out my gallery and don't forget to leave a comment!
User avatar
origamiguy
Super Member
Posts: 144
Joined: March 23rd, 2006, 8:13 pm
Location: Indianapolis, Indiana, USA
Contact:

Re: folding gold?

Post by origamiguy »

Cheers,
Brian K. Webb
http://www.eorigamipublishing.com
User avatar
OrigamiGeek
Forum Sensei
Posts: 966
Joined: February 17th, 2012, 2:29 pm
Location: calgary

Re: folding gold?

Post by OrigamiGeek »

cool does any one else know folding with gold?
Check out my gallery and don't forget to leave a comment!
User avatar
origamiguy
Super Member
Posts: 144
Joined: March 23rd, 2006, 8:13 pm
Location: Indianapolis, Indiana, USA
Contact:

Re: folding gold?

Post by origamiguy »

I have folded silver. i use the PMC (precious metals clay) squares to do it. They are small squares. Look up PMC gold or silver. I did not have the money to do gold. Silver can be a better place to start.
Cheers,
Brian K. Webb
http://www.eorigamipublishing.com
User avatar
OrigamiGeek
Forum Sensei
Posts: 966
Joined: February 17th, 2012, 2:29 pm
Location: calgary

Re: folding gold?

Post by OrigamiGeek »

does PMC silver fold nicely?
and how much is it?
Check out my gallery and don't forget to leave a comment!
User avatar
origamiguy
Super Member
Posts: 144
Joined: March 23rd, 2006, 8:13 pm
Location: Indianapolis, Indiana, USA
Contact:

Re: folding gold?

Post by origamiguy »

The crane is about as complex as you can get with PMC sheets, as it is only 6cm or 2.36 inches square. If they make larger squares I am unaware of it. You can just use the PMC clay, not sheets, and roll out your own square, but as you fold the material sticks to itself. If you use the PMC sheets, then they come pretreated with something that does not stick to itself.

Check out this site for more info.
http://www.riogrande.com/Product/PMC--P ... 886?pos=17

Characteristics of PMC Sheet
The PMC sheet consists of pure silver particles and binder only, containing no water. The special binder results in elasticity and flexibility without water. The sheet can be folded or cut with scissors like paper. Because it contains no moisture, there are no time constraints-model as long as you like.
If any water is applied or dropped on the sheet, the binder dissolves in water and the sheet may not retain its shape . To glue the sheets, use gum arabic (paste at stationery suppliers).
The sheet contains more binder than clay. Unlike PMC3, it does not fire at low temperatures. Always use an electric kiln and fire for 15 minutes or longer at 850°C or for five minutes or longer at 900°C.
Cheers,
Brian K. Webb
http://www.eorigamipublishing.com
User avatar
TheUnChosenOne
Super Member
Posts: 172
Joined: June 22nd, 2011, 4:45 am
Location: San Jose, CA, USA

Re: folding gold?

Post by TheUnChosenOne »

Ok fine. Eric Demaine, I wouldn't call him a dirty rich origamist, but he's a "certified genius" so it is a bit more understandable.
origamiguy wrote:I have folded silver. i use the PMC (precious metals clay) squares to do it. They are small squares. Look up PMC gold or silver. I did not have the money to do gold. Silver can be a better place to start.
Honestly, if I wanted a silver crane, I'd just use foil-backed paper! It would be cool to fold gold/silver though.
"No problem is so big or complicated that it can't be run away from."
--Charles Schulz
User avatar
origamiguy
Super Member
Posts: 144
Joined: March 23rd, 2006, 8:13 pm
Location: Indianapolis, Indiana, USA
Contact:

Re: folding gold?

Post by origamiguy »

TheUnChosenOne wrote:
"Ok fine. Eric Demaine, I wouldn't call him a dirty rich origamist, but he's a "certified genius" so it is a bit more understandable. "
I think Erik is just hosting the resurrected site of Thoki Yenn. I am not sure Erik has done one in gold himself. There are a lot of origami things Thoki Yenn did first or experimented with first.

Here is the relevant gold part:
"Thoki Yenn has ordered a german goldsmith,THE SAFIRO GALLRI in FREISING to make 6 replica of the CBP in REAL GOLD 13x13 millimeter with a safety device on the back so it can usedf as a lapel pin.

Thoki YENN will give his reason why he has decided to give his time and his money in this way, at the ORIGAMI MEETING in August This YEAR 2003 at the BAUHAUS DESSAU IN GERMANY"

By the way CBP is cross box pleat which should look familiar to anyone that has folded Fujimoto's works.
Cheers,
Brian K. Webb
http://www.eorigamipublishing.com
User avatar
GWB origami
Forum Sensei
Posts: 836
Joined: February 12th, 2012, 9:20 pm
Location: somewhere in the evil netherworld riding a giant, three headed tarantula
Contact:

Re: folding gold?

Post by GWB origami »

i dont think it would be too hard to fold with gold leaf.
User avatar
TheUnChosenOne
Super Member
Posts: 172
Joined: June 22nd, 2011, 4:45 am
Location: San Jose, CA, USA

Re: folding gold?

Post by TheUnChosenOne »

Yes, but think of the expenses.
"No problem is so big or complicated that it can't be run away from."
--Charles Schulz
the modern einstein

Re: folding gold?

Post by the modern einstein »

Gold leaf would be annoying to fold with. It has slightly different properties to gold, some of it (depending on where you buy it) being processed. Processed leaf flakes really easily, and is weak, and is probably a little too thin for folding models with. Also, I don't believe you can get it in actual sheets (at least in australia). An actual sheet of gold, on the other hand, if thin enough, would be quite good to fold, though impractically expensive.
Post Reply