Standard rose

n.d.c. · Post by **n.d.c.** » October 3rd, 2006, 3:51 pm

Hi there!

I have a problem folding a standard origami rose ... now I get to the point where I have to fold one quadrant with the other and I can't figure it out
so if anybody has any diagrams (please not from bloom4ever) or videos please tell me about it or send it to me.

Thank you

Post by **origami_8** » October 3rd, 2006, 4:04 pm

Read this:
viewtopic.php?t=753

n.d.c. · Post by **n.d.c.** » October 3rd, 2006, 4:11 pm

thanx! but that's not what i need, i need diagrams for standard origami rose not kawasaki rose,thanx anyway!

Post by **origami_8** » October 3rd, 2006, 4:21 pm

Could you please be a little more precise, what rose exactly do you mean, where are the diagrams to be found? Most "standard" roses out there are just some variations on the "old" Kawasaki-Rose. Videos for some of these variations can be found on YouTube, and many many more informations can be found on this Forum by reading through the topics the Origami Roses FAQ links to.

Cupcake · Post by **Cupcake** » October 3rd, 2006, 10:57 pm

Rose with Stem is quite close to what you're looking for. Of course, if you don't want the stem, you'd have to figure out how to make the bottom

islandmassive · Post by **islandmassive** » October 16th, 2006, 7:09 pm

do you mean the video on youtube
<embed src="http://www.youtube.com/v/BZnhMl85dq4" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed>

ps: theres somthing wrong with posting videos on the forum hence the "object" and "param" tags

Post by **origami_8** » October 16th, 2006, 9:05 pm

Posting of (YouTube-) videos works very good on this Forum, you just have to delete everything before <embed> and after </embed>

islandmassive · Post by **islandmassive** » October 16th, 2006, 10:46 pm

ohhhhhhhhhhhhhh

edited!

Cupcake · Post by **Cupcake** » October 16th, 2006, 10:49 pm

Yes, that is the rose i meant

islandmassive · Post by **islandmassive** » October 17th, 2006, 7:55 am

yes but this ones already got a locking bottom so no working it out

Cupcake · Post by **Cupcake** » October 17th, 2006, 6:57 pm

Ahh, but does it have a stem?

I think not

islandmassive · Post by **islandmassive** » October 18th, 2006, 7:32 am

ahhh

lightpaths · Post by **lightpaths** » October 15th, 2008, 8:56 pm

This link also might help:
http://www.geocities.com/lightpaths/2008/rose/

mrsriggins · Post by **mrsriggins** » October 15th, 2008, 9:17 pm

bloom4ever has a tutorial on the standard rose: http://www.bloom4ever.com/howto/howto01_0.html

The quadrant step really is not complicated. all you are doing is pulling one flap of paper over to the right and align the edges of the tops of the flaps then crease the paper that is underneath. The flaps won't align perfectly the one you pull over will be shorter but as long as you can get a small portion of it straight at the top it's good. You are doing this to all four flaps. Skip ahead to step 27 on the bloom tutorial to see the result of the 4 valley creases Then following the creaseswrap the flaps around the middle into a cylinder.

The Origami Forum

Standard rose

Standard rose

rose diagrams