Satoshi Kamiya - Ryu Zin (CP)

orislater · Post by **orislater** » November 25th, 2010, 8:47 pm

i thought you had thick kraft too? as used in the minotaur? But i think what you mentioned would work too

PauliusOrigami · Post by **PauliusOrigami** » November 25th, 2010, 8:58 pm

I had that kraft long ago

I will try out some kinds of papers

JUANC · Post by **JUANC** » November 25th, 2010, 10:09 pm

are you going to glue it?? i tried that and didn´t work...

cyitoh · Post by **cyitoh** » November 26th, 2010, 7:04 am

Hey, I was wondering if someone could show me how to fold the crease pattern above the scales, but below the arm?
It's image 7, page 63 on Kamiya's second book. For those who have the crease pattern, it's 1/6 from the bottom. That series of higher and lower folds that change the "big-Valley" or a "flat U" like fold to just a mountain/valley series.

Trouble · Post by **Trouble** » November 26th, 2010, 2:52 pm

Paulius if you have STAPLES the store on poland they sell many rolls of paper the thikness of printer paper for about 4 dollars give or take.

orislater · Post by **orislater** » November 26th, 2010, 6:01 pm

Paulius lives in Lithuania :/

PauliusOrigami · Post by **PauliusOrigami** » November 26th, 2010, 6:22 pm

Yes I do.

I'll look for a paper in rolls.. but wil not use stamples.. the paper would definitely tear.. ;/

Post by **origami_8** » November 27th, 2010, 7:57 am

I really doubt that any kind of Kraft paper I know of is thick enough to hold its weight on this scale. I'd go for something as stiff as Elephant Hide or maybe watercolour paper and glue together several sheets. You might also try to contact a paper manufacturer to try to get larger rolls of that stuff. If you explain them what you need it for and promise to advertise their paper a bit by showing what you folded, they may be willing to give it to you cheaper.

artur biernacki · Post by **artur biernacki** » January 3rd, 2011, 3:58 pm

I folded new Ryu zin 3,5 from bigger paper like before (I connect a 4 papers).

Artur
http://www.flickr.com/arturori

Kijjakarn · Post by **Kijjakarn** » January 3rd, 2011, 4:49 pm

This model folded by Artur has always been beautiful.

Trouble · Post by **Trouble** » January 3rd, 2011, 8:50 pm

Artur you are amazing

redheadorigami · Post by **redheadorigami** » January 4th, 2011, 2:38 pm

orislater wrote:i thought you had thick kraft too? as used in the minotaur? But i think what you mentioned would work too

K-k-k-k- kraft?
For IT!?

orislater · Post by **orislater** » January 4th, 2011, 6:05 pm

arturs is folded from kkkk kraft

debugmode · Post by **debugmode** » January 4th, 2011, 8:24 pm

Hey Artur I hope some day I can read CP like you

I do not want anything else...

artur biernacki · Post by **artur biernacki** » January 7th, 2011, 11:48 pm

I wish you this so much.
Artur
http://www.flickr.com/arturori